Skip to main content

REMBE® Industry and application guide

We bring you quickly to the right product.

The protection of individual system components is only as good as the protection of the entire system. Pay particular attention to having sufficient decoupling devices, and the protection against 'over engineering'. Only if the entire system is observed, and the individual protective measures are aligned to each other, will your Explosion Safety concept be safe and economic. We therefore offer you comprehensive protection concepts and on-site consulting, on how you can implement organizational measures to achieve a greater degree of safety.
Industry and application guide Explosion Protection
Industry and application guide Process Safety

Industry and application guide Explosion Protection

EGV

EGV

explosion vent
for zero to low pressure or vacuum.
EDP

EDP

explosion vent
for low to medium vacuum and pressure cycling.
MDX

MDX

explosion vent
for low burst pressure with high vacuum.
ODV, ODU

ODV, ODU

explosion vent
for high to full vacuum and pressure cycling.
EGV HYP

EGV HYP

explosion vent
for zero to low negative pressure applications.
ERO

ERO

explosion vent
for low to medium pressure + alternating pressure.
TARGO-VENT

TARGO-VENT

opening angle limiter
Add-on module to ­reduce the size of dangerous areas.
Q-Rohr®

Q-Rohr®

Flameless venting
The all-rounder.
Q-Rohr® DFE Gas

Q-Rohr® DFE Gas

Flameless venting
for exhaust ducts of Gas-Fuelled Engines.
Q-Rohr® DFE Maritime

Q-Rohr® DFE Maritime

Flameless venting
for exhaust ducts of Dual-Fuel Engines.
Q-Rohr® 6T

Q-Rohr® 6T

Flameless venting
Special challenges with metal dusts.
Q-Box® R3leaf™

Q-Box® R3leaf™

Flameless venting
Sustainable flameless venting of dust explosions.
Q-Ball® E

Q-Ball® E

Flameless venting
Maximum relief effectiveness, minimum weight for elevators.
Q-Ball® S

Q-Ball® S

Flameless venting
Stable + light as a feather for oscillating machines such as vibrating screens.
EXKOP® System

EXKOP® System

Explosion Isolation
Space-saving, bidirectional isolation.
ETX™

ETX™

Explosion Door
for dryers, automatically reclosing.
EXKOP® QV II

EXKOP® QV II

Explosion Isolation
Space-saving, bidirectional isolation.
EXKOP® QV III

EXKOP® QV III

Explosion Isolation
Space-saving, bidirectional isolation.
EXKOP® Express

EXKOP® Express

Explosion Isolation
controller for all isolation devices.
Q-Flap RX™

Q-Flap RX™

Explosion Isolation
Effectively isolated.
Q-Bic™

Q-Bic™

extinguishing agent barrier
Active isolation.
VENTEX®

VENTEX®

Explosion Isolation
Isolation with explosion safety valve.
REDEX® Slide

REDEX® Slide

Slide Valve
Active isolation of abrasive media.
RSV

RSV

Slide Valve
Record closing times, flexible installation at any angle.
CO.Pilot

CO.Pilot

CO detection system
Combined CO-Detection and humidity measurement.
Q.Crodile Grounding clamps + Grounding cables and -reels

Q.Crodile Grounding clamps + Grounding cables and -reels

Accessoires for your grounding monitoring.
SYMEGA.PRO

SYMEGA.PRO

Grounding system
SYMEGA.VO

SYMEGA.VO

Grounding monitoring system
GSMX-P

GSMX-P

Gas detection
for use in ventilation ducts up to DN 1000.
REMBE® signalling, frames, gaskets + covers

signalling, frames, gaskets + covers

Accessories for your explosion vents.
BESS.EGV

BESS.EGV

deflagration vent
Roof-mounted deflagration venting as the most economical solution.
BESS.EGV-IAF

BESS.EGV-IAF

explosion vent
Roof-mounted vent panel with interior insulation.
BESS.IKLI-EGV

BESS.IKLI-EGV

explosion vent
Roof-mounted vent panel with exterior insulation.
BESS.TGV

BESS.TGV

Module to reduce hazardous areas
Innovative side-wall deflagration venting for ultimate flexibility.
BESS.Q.Vent

BESS.Q.Vent

Flameless venting
Flameless venting for indoor BESS and sensitive environments.
GSME

GSME

Gas detection
for storage points, extraction + filter ­systems for the ­detection of ­combustion gases.
Hotspot

Hotspot

IR camera system
checks the surface temperature of the processed material.

Industry and application guide Process Safety

FRD

FRD

flat rupture disc
the flat rupture disc.
GRX®

GRX®

graphite rupture disc
for extremely ­corrosive media in connection with low pressures + high ­temperatures.
UKB® LS

UKB® LS

customised compact rupture discs
for low burst pressure + high vacuum.
Plug Type

Plug Type

customised compact rupture discs
the individual alternative.
HPRD

HPRD

high pressure rupture disc
for high pressure + extreme temperatures.
Extruder rupture discs

Extruder rupture discs

customised compact rupture discs
for the plastics- and food processing industries.
KUB®

KUB®

reverse acting rupture disc
developed for your success.
KUB® clean

KUB® clean

reverse acting rupture disc
for aseptic operating conditions.
KUB® V

KUB® V

reverse acting rupture disc
for isolating safety valves.
KUB® F

KUB® F

reverse acting rupture disc
for installation ­directly between flanges.
IKB®

IKB®

reverse acting rupture disc
the rupture disc with the patented ­manufacturing process.
ODV

ODV

forward acting rupture discs
for low to medium pressures.
ODV F

ODV F

forward acting rupture disc
for low-pressure ­applications without a holder.
STAR

STAR

forward acting rupture disc
for low to high ­pressures.
SFD

SFD

forward acting rupture disc
for low to high ­pressures.
CBS

CBS

forward acting rupture disc
to protect intermodal tank systems.
BT

BT

single layer rupture disc
for simple ­applications with medium to high ­pressures.
ZW

ZW

bi-directional rupture disc
opens in one ­direction at defined overpressure + in the other direction at vacuum.
two piece holder

two piece holder

rupture disc holder
for reverse acting rupture discs with ­integrated centering pin.
flat-seat holder

flat-seat holder

rupture disc holder
for reverse acting rupture disks for a leak-free seal.
doubleholder

doubleholder

rupture disc holder
for the use of two bursting discs ­connected in series.
heated, cooled holder

heated, cooled holder

rupture disc holder
in applications with polymerizing media.
threaded holder

threaded holder

rupture disc holder
for small assemblies.
ELEVENT®

ELEVENT®

breather valve
optimum protection for vessels + tanks with low design pressure.
signalling devices

signalling devices

Accessories for your bursting discs
Automated processes use intelligent signalling systems to keep you informed at all times about the status of your entire plant and any faults that may arise. You can even install signalling devices for rupture discs that have already been installed. To evaluate the signals, we offer you an isolating switching amplifier with a relay output, which ensures an intrinsically safe quiescent circuit. The potential-free relay contact is used for safe system shutdown or alarming.
TEP

TEP

Tube-End-Protection-Protective cover
for discharge pipes.
Any Questions?
We will be happy to advise you about the most suitable products for your process. Individually, in detail and taking all relevant parameters into account.
Contact us.
Consulting. Engineering. Products. Service.
REMBE® GmbH Safety+Control
© REMBE® GmbH Safety+Control